127.978 - POLYESTER SPRAY FILLER 1KG

POLYESTER SPRAY FILLER 1KG

Product: 127.978 Revision Date: 2018/09/04
Section 1: PRODUCT INFORMATION
Section 2: HAZARDOUS INGREDIENTS
Section 2A: ADDITIONAL INGREDIENT INFORMATION
Section 3: PHYSICAL DATA
Section 4: FIRE & EXPLOSION DATA
Section 5: REACTIVITY DATA
Section 6: TOXICOLOGICAL PROPERTIES
Section 7: PREVENTATIVE MEASURES
Section 8: FIRST AID MEASURES
Section 9: ADDITIONAL INFORMATION
Section 1: PRODUCT INFORMATION
Product name:
CARWORX SPRAY
Manufacturer emergency phone number:
Canutec 613-996-6666
Supplier:
CarWorx Distribution Inc.
3800 Transcanada Hwy
Pointe-Claire, Quebec, Canada
H9R 1B1
Chemical family:
Not available
Product uses:
Knife filler/surfacer
TDG classification:
RESIN SOLUTION
UN1866
Class 3
PG III
Special instructions:
Not available
DSL status:
The substance(s) listed in the ingredients section appear on the Domestic Substances List
Information phone number:
514-745-5959 (1-877-745-5959)
Synonyms:
None
Date of the supplier's latest SDS revision:
2014/06/30
Recommended restrictions on use:
For use in industrial installations or professional treatment only
Section 2: HAZARDOUS INGREDIENTS
C.A.S. CONCENTRATION % Ingredient Name T.L.V. LD/50 LC/50
100-42-5 10-25 STYRENE
20 PPM 2650 MG/KG
RAT ORAL

316 MG/KG
MOUSE ORAL
11800 MG/M3/4H
RAT INHALATION

9500 MG/M3/4H
MOUSE INHALATION
21000 MG/M3/2H
MOUSE INHALATION
Section 2A: ADDITIONAL INGREDIENT INFORMATION
Supplier's LD50 and LC50 values:
CAS# 100-42-5: LD50 > 2000 mg/kg rat dermal
Section 3: PHYSICAL DATA
Melting point (°C):
Not available
Physical state:
Liquid
Appearance & odor:
Grey
Characteristic odour
Fluid
Odor threshold (ppm):
Not available
pH:
Not available
Specific gravity @ 20 °C:
Not available
Initial boiling point/Boiling range (°C):
145°C
Vapour pressure (mmHg):
6 hPa @ 20°C
Vapour density (air=1):
Not available
Freezing point (°C):
Not available
Evaporation rate
(butyl acetate = 1):
Not available
By weight:
Not available
Solubility in water (%):
Not miscible or difficult to mix
Coefficient of water\oil dist.:
Not available
VOC:
Not available
Solid content:
Not available
Density:
1.7 g/cm3 @ 20C
Relative density:
Not available
Section 4: FIRE & EXPLOSION DATA
Flammability:
Flammable
Conditions of flammability:
Heat, sparks and open flames
Extinguishing media:
Carbon dioxide
Water spray
Powder
Do not use direct water jet
For large fires use water spray
Special procedures:
Firefighters should wear adequate protective gear
Positive pressure self-contained breathing apparatus required and full protection to prevent skin contact
Use water spray to cool fire exposed containers
Collect contaminated fire fighting water separately. It must not enter the sewage system
Dispose of fire debris and contaminated fire fighting water in accordance with official regulations
Flash point (°C), method:
31°C (88°F)
Auto-ignition temperature (°C):
480
Upper flammability
limit (% vol):
Not available
Lower flammability
limit (% vol):
Not available
Hazardous combustion products:
Formation of toxic gases is possible during heating or in case of fire
Sensitivity to static discharge:
Not available
Sensitivity to mechanical impact:
Not available
Rate of burning:
Not available
Explosive power:
Not available
Lower explosive limit:
1.2 Vol %
Upper explosive limit:
8.9 Vol %
Section 5: REACTIVITY DATA
Chemical stability:
Product is stable under normal handling and storage conditions
Conditions of instability:
Heat, sparks & open flame
All ignition sources
Direct sunlight
Hazardous polymerization:
Exothermic
Incompatible substances:
Peroxides
Other radical components
Hazardous decomposition products:
Toxic gases
Section 6: TOXICOLOGICAL PROPERTIES
Route of entry:
Skin contact, eye contact, inhalation and ingestion
Eye contact:
Causes serious eye irritation
Skin contact:
Causes skin irritation
Skin absorption:
Not available
Inhalation:
May cause respiratory irritation
Ingestion:
Not available
Effects of chronic exposure:
Causes damage to the hearing organs through prolonged or repeated exposure
LD50 of product, species & route:
Not available for mixture, see the ingredients section
LC50 of product, species & route:
Not available for mixture, see the ingredients section
Exposure limit of material:
Not available for mixture, see the ingredients section
Sensitization to product:
May cause skin sensitization on prolonged contact
Carcinogenic effects:
Not available
Reproductive effects:
Suspected of damaging the unborn child
Teratogenicity:
Not available
Mutagenicity:
Not available
Synergistic materials:
Not available
Section 7: PREVENTATIVE MEASURES
Gloves/Type:
Fluorocarbon rubber
Do not use PVC gloves
Do not use nitrile gloves
Do not use natural rubber gloves
Do not use butyl rubber
Respiratory/Type:
Approved air purifying respirator for vapors
In case of brief exposure or low pollution use respiratory filter device
Eye/Type:
Tight fitting safety goggles
Footwear/Type:
Safety shoes per local regulations
Clothing/Type:
Wear adequate protective clothes
Other/Type:
Eye wash facility should be in close proximity
Emergency shower should be in close proximity
Ventilation requirements:
Local exhaust and/or general ventilation
To maintain exposure below TLV
Leak/Spill:
Eliminate all sources of heat and ignition
Evacuate all non-essential personnel
Prevent entry into drains, sewers, and other waterways
Avoid all personal contact
Wear appropriate protective equipment
Do not flush area with water
Place in appropriate container for disposal
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust)
Prevent the formation of vapor/air mixtures
Waste disposal:
Do not dispose in sewers
Do not dispose of with normal garbage
Handling procedures and equipment:
Keep away from heat, sparks, and open flame
Use adequate ventilation
Wash thoroughly after using, particularly before eating or smoking
Equipment must be grounded to prevent static sparks
Avoid smoking in area of use
Avoid contact with skin, eyes and clothing
Do not eat, drink or smoke in handling area
Storage requirements:
Keep away from heat, sparks, and open flames
Avoid static electricity - ground containers when transferring product
Keep out of direct sunlight
Store below 30°C
Store away from oxidizing materials
Store in original container
Store in a cool, dry and well ventilated area
Store away from food
Store in tightly sealed containers
Special shipping information:
See transportation information
Section 8: FIRST AID MEASURES
Skin contact:
Wash thoroughly with soap and water
If irritation occurs, consult a physician
Eye contact:
Immediately flush with copious amount of water. Get medical attention
Inhalation:
Remove victim to fresh air. If not breathing, qualified personnel should administer artificial respiration. Get medical attention
Keep person warm and at rest
Ingestion:
Obtain immediate medical attention
Do not induce vomiting
Never give anything by mouth to an unconscious person
Additional information:
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies
Note to physician:
Symptoms may be delayed
Section 9: ADDITIONAL INFORMATION
Issued by:
Environment, health and safety
Data prepared by:
Conform-Action Data Systems
A division of 2843471 Canada Inc.
wwww.netmsds.com
Tel: (514) 683-2060
E-mail: Support@cads.ca .