126.027 - MATT BLACK SPRAY

C.A.S.	CONCENTRATION %	Ingredient Name	T.L.V.	LD/50	LC/50
106-97-8	10- <25	N-BUTANE	1000 PPM	NOT AVAILABLE	658,000 MG/M3/4H RAT INHALATION 680,000 MG/M3/2H MOUSE INHALATION
123-86-4	10- <20	N-BUTYL ACETATE	150 PPM	10,768 MG/KG RAT ORAL 6000 MG/KG MOUSE ORAL 3200 MG/KG RABBIT ORAL >17,600 MG/KG RABBIT DERMAL	390 PPM/4H RAT INHALATION 6000 MG/M3/2H MOUSE INHALATION
64-17-5	0.1- <2.5	ETHYL ALCOHOL	1000 PPM	7060 MG/KG RAT ORAL 3450 MG/KG MOUSE ORAL 6300 MG/KG RABBIT ORAL	20,000 PPM/10H RAT INHALATION 39,000 MG/M3/4H MOUSE INHALATION
64742-94-5	0.1- <2.5	NAPHTHA, PETROLEUM	NOT AVAILABLE	> 2 ML/KG RABBIT DERMAL	> 590 MG/M3/4H RAT INHALATION
67-63-0	0.1- <2.5	2-PROPANOL	200 PPM	5000 MG/KG RAT ORAL 3600 MG/KG MOUSE ORAL 6410 MG/KG RABBIT ORAL 12,800 MG/KG RABBIT DERMAL	53,000 MG/M3 MOUSE INHALATION 72,600 MG/M3 RAT INHALATION 16,000 PPM/8H RAT INHALATION
67-64-1	25-50	ACETONE	500 PPM	5800 MG/KG RAT ORAL 3000 MG/KG MOUSE ORAL 5340 MG/KG RABBIT ORAL	50,100 MG/M3/8H RAT INHALATION 44,000 MG/M3/4H MOUSE INHALATION
74-98-6	10- <25	PROPANE	1000 PPM	NOT AVAILABLE	>800000 PPM/15MIN RAT INHALATION
75-28-5	2.5- <10	ISOBUTANE	1000 PPM	NOT AVAILABLE	57 PPM/15M RAT INHALATION 680,000 MG/M3/2H MOUSE INHALATION 658,000 MG/M3/4H RAT INHALATION
9004-70-0	2.5- <10	NITROCELLULOSE	NOT AVAILABLE	>5000 MG/KG RAT ORAL >5000 MG/KG MOUSE ORAL	NOT AVAILABLE

Section 3: PHYSICAL DATA

Melting point (°C):

Not available

Physical state:

Aerosol

Appearance & odor:

Characteristic odour

According to product specification

Odor threshold (ppm):

Not available

pH:

Not available

Specific gravity @ 20 °C:

Not available

Initial boiling point/Boiling range (°C):

-44 C.

Vapour pressure (mmHg):

@ 20°C

8300 hpa

Vapour density (air=1):

Not available

Freezing point (°C):

Not available

Evaporation rate
(butyl acetate = 1):

Not available

By volume:

Not available

Solubility in water (%):

Not miscible or difficult to mix

Coefficient of water\oil dist.:

Not available

VOC:

85.10%

Viscosity:

Not available

Solid content:

14.9%

Density:

DIN 53217

@ 20°C

0.755 g/cm3

Relative density:

Not available

Section 4: FIRE & EXPLOSION DATA

Flammability:

Flammable aerosol

Conditions of flammability:

Heat, sparks and open flames

Extinguishing media:

Carbon dioxide

Sand

Extinguishing powder

Do not use water

Do not use direct water jet

Special procedures:

Firefighters should wear the usual protective gear

Wear a self contained breathing apparatus

Flash point (°C), method:

DIN 53213

< 0°C

Auto-ignition temperature (°C):

DIN 51794

365°C

Upper flammability
limit (% vol):

Not available

Lower flammability
limit (% vol):

Not available

Hazardous combustion products:

Not available

Sensitivity to static discharge:

Take precautions against static discharge

Sensitivity to mechanical impact:

Protect against physical damage

Rate of burning:

Not available

Explosive power:

Aerosol containers are extremely flammable. Containers may rupture if exposed to heat or fire

Lower explosive limit:

1.2 Vol %

Upper explosive limit:

13 Vol %

Section 5: REACTIVITY DATA

Chemical stability:

Product is stable under normal handling and storage conditions

Conditions of instability:

None known

Hazardous polymerization:

Not available

Incompatible substances:

Not available

Hazardous decomposition products:

Carbon monoxide

Section 6: TOXICOLOGICAL PROPERTIES

Route of entry:

Skin contact, eye contact, inhalation and ingestion

Eye contact:

Causes serious eye irritation

Skin contact:

Not available

Inhalation:

Not available

Ingestion:

Not available

Effects of chronic exposure:

Not available

LD50 of product, species & route:

Not available for mixture, see the ingredients section

LC50 of product, species & route:

Not available for mixture, see the ingredients section

Exposure limit of material:

Not available for mixture, see the ingredients section

Sensitization to product:

Not a sensitizer

Carcinogenic effects:

Not available

Reproductive effects:

Not available

Teratogenicity:

Not available

Mutagenicity:

Not available

Synergistic materials:

Not available

Section 7: PREVENTATIVE MEASURES

Gloves/Type:

Impervious gloves

Resistant gloves

The exact breakthrough time has to be found out by the manufacturer of the protective gloves and has to be observed

It should be noted that the time to breakthrough for any glove material may be different for different glove manufacturers. In the case of mixtures, consisting of several substances, the protection time of the gloves cannot be accurately estimated

Respiratory/Type:

NIOSH approved respirator, if necessary

Eye/Type:

Tight fitting safety goggles

Footwear/Type:

Safety shoes per local regulations

Clothing/Type:

As required to prevent skin contact

Other/Type:

Eye wash facility should be in close proximity

Emergency shower should be in close proximity

Ventilation requirements:

Ventilate adequately

Leak/Spill:

Eliminate all sources of ignition

Evacuate all non-essential personnel

Prevent entry into drains, sewers, and other waterways

Ventilate area

Wear appropriate protective equipment

Place in appropriate container

Notify the appropriate authorities as required

Do not flush with water or aqueous cleansing agent

Waste disposal:

In accordance with municipal, provincial and federal regulations

Do not dispose in sewers

Do not dispose of with normal garbage

Handling procedures and equipment:

Handle and open container with care

Protect against physical damage

Keep away from heat, sparks, and open flame

Use adequate ventilation

Wear personal protective equipment appropriate to task

Wash clothing before re-use

Wash thoroughly after handling

Avoid smoking in area of use

Keep out of reach of children

Avoid breathing vapor and spray

Use proper grounding procedures

Avoid contact with skin, eyes and clothing

Do not puncture, incinerate, or burn

Storage requirements:

Do not store near foodstuffs

Keep out of direct sunlight

Keep away from ignition sources

Store below 50°C (122°F)

Store in a cool, dry and well ventilated area

Store in tightly sealed containers

Special shipping information:

See transportation information

Section 8: FIRST AID MEASURES

Skin contact:

Wash thoroughly with soap and water

Consult a physician if irritation persists

Eye contact:

Immediately flush eyes with plenty of water for at least 15 minutes

Consult a physician if irritation persists

Inhalation:

Remove victim to fresh air

If irritation persists, seek medical attention

Ingestion:

Never give anything by mouth to an unconscious person

If irritation occurs, consult a physician

Additional information:

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies

Section 9: ADDITIONAL INFORMATION

Data prepared by:

Conform-Action Data Systems
A division of 2843471 Canada Inc.
wwww.netmsds.com
Tel: (514) 683-2060
E-mail: Support@cads.ca .