|
Product:
126.066
|
Revision Date:
2018/09/04
|
|
|
|
Product name:
|
|
Manufacturer emergency phone number:
|
|
Supplier:
|
CarWorx Distribution Inc.
3800 Transcanada Hwy
Pointe-Claire, Quebec, Canada
H9R 1B1
|
|
Chemical family:
|
|
Product uses:
|
For professional use only
|
|
TDG classification:
|
|
Special instructions:
|
|
DSL status:
|
The substance(s) listed in the ingredients section appear on the Domestic Substances List
|
|
Information phone number:
|
514-745-5959 (1-877-745-5959)
|
|
Synonyms:
|
|
Date of the supplier's latest SDS revision:
|
|
Recommended restrictions on use:
|
For use in industrial installations or professional treatment only
|
|
|
|
C.A.S. |
CONCENTRATION % |
Ingredient Name |
T.L.V. |
LD/50 |
LC/50 |
100-41-4 |
1-<2.5 |
ETHYLBENZENE
|
20 PPM |
3500 MG/KG
RAT ORAL
>5000 MG/KG
RABBIT DERMAL
|
4000 PPM/4H
RABBIT INHALATION
55,000 MG/M3/2H
RAT INHALATION
35,500 MG/M3/2H
MOUSE INHALATION
|
101-68-8 |
0.5-<1 |
METHYLENE (BISPHENYL ISOCYANATE)
|
0.005 PPM |
9200 MG/KG
RAT ORAL
2200 MG/KG
MOUSE ORAL
|
178 MG/M3
RAT INHALATION
|
1305-62-0 |
0.25-<0.5 |
CALCIUM HYDROXIDE
|
5 MG/M3 |
7340 MG/KG
RAT ORAL
7300 MG/KG
MOUSE ORAL
|
NOT AVAILABLE
|
1330-20-7 |
5-<10 |
XYLENE
|
100 PPM |
4300 MG/KG
RAT ORAL
2119 MG/KG
MOUSE ORAL
>1700 MG/KG
RABBIT DERMAL
|
5000 PPM/4 HR
RAT INHALATION
|
41556-26-7 |
0.2-<0.25 |
BIS PENTAMETHYL PIPERIDYNYL SEBACATE
|
NOT AVAILABLE |
NOT AVAILABLE
|
NOT AVAILABLE
|
| |
|
Supplier Exposure Limit Values:
|
Xylene (mixture of isomers)
CAS# 1330-20-7:
IOELV (8H) 50 ppm / 221 mg/m3
IOELV (STEL) 100 ppm / 442 mg/m3
.
|
Ethylbenzene
CAS# 100-41-4:
IOELV (8H) 442 mg/m3
IOELV (STEL) 200 ppm / 884 mg/m3
.
|
|
Supplier's LD50 and LC50 values:
|
CAS# 101-68-8: LD50 10,000 mg/kg rabbit dermal
|
CAS# 1330-20-7: LD50 2100 mg/kg rat oral
|
CAS# 1330-20-7: LD50 1100 mg/kg rat dermal
|
|
|
|
Melting point (°C):
|
|
Physical state:
|
|
Appearance & odor:
|
|
Odor threshold (ppm):
|
|
pH:
|
|
Specific gravity @ 20 °C:
|
|
Initial boiling point/Boiling range (°C):
|
At atmospheric pressure
|
137
|
|
Vapour pressure (mmHg):
|
717 Pa @ 20°C
3820 Pa (4 kPa) @ 50°C
|
|
Vapour density (air=1):
|
|
Freezing point (°C):
|
|
Evaporation rate
(butyl acetate = 1):
|
|
By weight:
|
|
Solubility in water (%):
|
Not applicable
|
@ 20°C (68°F)
|
|
Coefficient of water\oil dist.:
|
|
VOC:
|
V.O.C. (Supply): 10.8% weight
|
V.O.C. density @ 20°C: 124.2 kg/m3 (124.2 g/L)
|
Average carbon number: 8.7
|
Average molecular weight: 118.83 g/mol
|
|
Solid content:
|
|
Density:
|
|
Relative density:
|
|
Dynamic viscosity @ 20°C:
|
|
Kinematic viscosity @ 20°C:
|
|
Kinematic viscosity @ 40°C:
|
|
|
|
Flammability:
|
|
Conditions of flammability:
|
Heat, sparks and open flames
|
|
Extinguishing media:
|
Foam
|
Carbon dioxide
|
ABC powder
|
Polyvalent powder
|
Do not use tap water
|
|
Special procedures:
|
Firefighters should wear adequate protective gear
|
Positive pressure self-contained breathing apparatus required and full protection to prevent skin
contact
|
In case of fire, refrigerate the storage containers
|
Destroy any source of ignition
|
Avoid spillage of the products used to extinguish the fire into an aqueous medium
|
|
Flash point (°C), method:
|
|
Auto-ignition temperature (°C):
|
|
Upper flammability
limit (% vol):
|
|
Lower flammability
limit (% vol):
|
|
Hazardous combustion products:
|
Reactive sub-products are created that can become highly toxic and, consequently, can present a
serious health risk
|
|
Sensitivity to static discharge:
|
|
Sensitivity to mechanical impact:
|
|
Rate of burning:
|
|
Explosive power:
|
|
Lower explosive limit:
|
|
Upper explosive limit:
|
|
|
|
Chemical stability:
|
Product is stable under normal handling and storage conditions
|
|
Conditions of instability:
|
Strong acids
|
Direct sunlight
|
Air
|
Humidity
|
Reactivity increases with temperature
|
Contact with combustible material
|
Strong bases
|
Alkalies
|
|
Hazardous polymerization:
|
|
Incompatible substances:
|
|
Hazardous decomposition products:
|
Organic compounds
|
Carbon monoxide
|
Carbon dioxide
|
Depending on the decomposition conditions, complex mixtures of chemical substances can be released
|
|
|
|
Route of entry:
|
Skin contact, eye contact, inhalation and ingestion
|
|
Eye contact:
|
Contains substances classified as dangerous
|
|
Skin contact:
|
Contains substances classified as dangerous
|
|
Skin absorption:
|
|
Inhalation:
|
Contains substances classified as dangerous
|
|
Ingestion:
|
Contains substances classified as dangerous
|
|
Effects of chronic exposure:
|
May be an aspiration hazard
|
|
LD50 of product, species & route:
|
Not available for mixture, see the ingredients section
|
|
LC50 of product, species & route:
|
Not available for mixture, see the ingredients section
|
|
Exposure limit of material:
|
Not available for mixture, see the ingredients section
|
|
Sensitization to product:
|
May cause skin sensitization
|
May cause respiratory sensitization
|
|
Carcinogenic effects:
|
Not listed as a carcinogen
|
|
Reproductive effects:
|
|
Teratogenicity:
|
|
Mutagenicity:
|
|
Synergistic materials:
|
|
|
|
Gloves/Type:
|
|
Wear appropriate gloves
|
|
Replace gloves in case of any sign of damage
|
|
Respiratory/Type:
|
Filter mask for gases, vapours and particulates
|
|
Eye/Type:
|
Panoramic glasses against splashing
|
Clean daily and disinfect periodically according to the manufacturer's instructions
|
|
Footwear/Type:
|
Safety shoes per local regulations
|
Antistatic footwear
|
Wear heat protective boots
|
|
Clothing/Type:
|
Antistatic clothing
|
Fire resistant clothing
|
|
Other/Type:
|
Eye wash facility should be in close proximity
|
Emergency shower should be in close proximity
|
|
Ventilation requirements:
|
Local exhaust and/or general ventilation
|
To maintain exposure below TLV
|
|
Leak/Spill:
|
Eliminate all sources of heat and ignition
|
Evacuate all non-essential personnel
|
Prevent entry into drains, sewers, and other waterways
|
Wear appropriate protective equipment
|
Ground handling equipment
|
Do not use combustible materials such as sawdust
|
Place in appropriate container for disposal
|
Absorb with sand
|
Prevent the formation of vapor/air mixtures
|
|
Waste disposal:
|
Do not dispose down the drain
|
|
Handling procedures and equipment:
|
Maintain a good personal hygiene
|
Use adequate ventilation
|
Keep container hermetically closed when not in use
|
Wash thoroughly after using, particularly before eating or smoking
|
Equipment must be grounded to prevent static sparks
|
Do not eat, drink or smoke in handling area
|
Use care to avoid spills
|
Do not wear work clothes made of acrylic fibres, preferably wearing cotton clothing and conductive
footwear
|
Avoid leakages from the container
|
Have absorbent material available near product
|
Avoid the existence of dangerous atmospheres inside containers, applying inertization systems where
possible. Transfer at a slow speed to avoid the creation of electrostatic charges. Against the
possibility of electrostatic charges: ensure a perfect equipotential connection
|
|
Storage requirements:
|
Keep away from heat, sparks, and open flames
|
Avoid static electricity - ground containers when transferring product
|
Store away from food
|
Keep away from radiation sources
|
Minimum Temp: 5°C
|
Maximum Temp: 30°C
|
Maximum time: 12 months
|
|
Special shipping information:
|
See transportation information
|
|
|
|
Skin contact:
|
Remove contaminated clothing and shoes
|
Wash thoroughly with soap and water
|
Seek medical attention if irritation persists
|
|
Eye contact:
|
Immediately flush eyes with plenty of water for at least 15 minutes
|
Check for and remove contact lenses
|
Obtain emergency medical attention
|
|
Inhalation:
|
Remove victim to fresh air
|
Obtain medical attention
|
Keep person warm and at rest
|
|
Ingestion:
|
Obtain immediate medical attention
|
Do not induce vomiting
|
If vomiting occurs, keep head below hips
|
Never give anything by mouth to an unconscious person
|
Rinse mouth with water
|
|
Additional information:
|
The above information is believed to be correct but does not purport to be all inclusive and shall
be used only as a guide. This company shall not be held liable for any inaccuracies
|
|
Note to physician:
|
The symptoms resulting from intoxication can appear after exposure, therefore, in case of doubt,
seek medical attention for direct exposure to the chemical product or persistent discomfort,
showing the SDS of this product
|
|
|
|
Issued by:
|
Environment, health and safety
|
|
Data prepared by:
|
Conform-Action Data Systems
A division of 2843471 Canada Inc.
wwww.netmsds.com
Tel: (514) 683-2060
E-mail: Support@cads.ca .
|
|
|